UVDTF Jeep Girl 40oz Wrap

Top portion 

10.91 inches wide by 5 inches high approximately 

Bottom portion 

9.6 inches wide by 3.00 inches high approximately 

Items sold individually qty of 1

Color may vary depending on lighting and exposure 

UV DTF Transfer Instructions

UV DTF transfers apply to clean, smooth, hard surfaces such as cups, tumblers, glass, acrylic, plastic, and metal.

Application

Clean the surface with rubbing alcohol and let it dry completely.

Rub the transfer firmly with a squeegee or card.

Slowly remove the white backing, keeping the design on the clear film.

Position the transfer carefully. Press it down from one edge, working across to avoid bubbles and wrinkles. The strong adhesive may prevent repositioning.

Rub the entire design firmly, especially the edges and small details.

Slowly peel away the clear film at a sharp angle. If the design lifts, rub the area again before continuing.

Care

Hand wash only.

Do not soak, scrub over the design, or use abrasive cleaners.

Not dishwasher or microwave safe.

Avoid excessive heat.

Allow 24–48 hours for the adhesive to bond before washing.

Not recommended for textured, porous, or flexible surfaces.

Disclaimer

UV DTF transfers are ready-to-apply decals. Homestead Silicone Beads and More LLC is not responsible for transfers damaged, misaligned, or ruined during application, including errors caused by improper preparation, incompatible surfaces, or incorrect care.

Transfers generally cannot be removed and reapplied. Refunds or replacements will not be issued for customer-caused damage.

Please inspect your transfer before applying. Contact us before application if it arrives defective or damaged.

By purchasing and applying a UV DTF transfer, you acknowledge that you have read and understand these instructions.

Thank you for shopping with Homestead Silicone Beads and More LLC!